Peloton equipment has become one of the most common specialty items in household moves. The Peloton Bike weighs about 135 pounds and the Peloton Tread weighs approximately 455 pounds, making both challenging to move without proper preparation. The touchscreen displays are expensive to replace (upward of $500) and the calibration can be affected by rough handling. Whether you hire movers or handle it yourself, these steps will protect your investment and keep your leaderboard data intact.
Start by removing the touchscreen, which is the most fragile and expensive component. Power off the bike and unplug it. The screen attaches to the handlebars via a mounting bracket with bolts accessible from the back. Use the appropriate hex wrench (included with the original toolkit) to remove the screen. Wrap it in bubble wrap and pack it in a box with padding on all sides. If you still have the original Peloton packaging, use it because it was designed specifically for this purpose. Next, remove the pedals. The left pedal has reverse threading (turn clockwise to remove) and the right pedal has standard threading (turn counterclockwise to remove). Use a 15mm pedal wrench or adjustable wrench. Wrap the pedals separately and label them left and right. Lower the seat and handlebars to their lowest positions and tighten the adjustment knobs to prevent them from extending during transport. Unplug the power cord and tape it to the frame. The bike can then be moved using its built-in transport wheels by tilting it forward and rolling it. For loading into a vehicle, two people should lift the bike by the frame, never by the screen mount, handlebars, or seat post.
The Peloton Tread is significantly heavier and more complex to move than the bike. At approximately 455 pounds, it requires at least 3 strong people or 2 people with an appliance dolly. Start by removing the touchscreen using the same careful process as the bike. The Tread screen is larger and even more expensive to replace. Fold the tread deck upward if your model supports folding, and engage the safety lock. The Tread does not fold as compactly as standard treadmills, so measure doorways and hallways along the exit path. Remove the safety key and tape it to the base. Coil and secure the power cord. The Tread has transport wheels that allow you to roll it once tipped forward, but the weight makes this challenging. For loading into a moving truck, an appliance dolly rated for at least 600 pounds is essential. Secure the Tread to the dolly with heavy-duty straps before attempting to move it up or down any ramp or stairs. Inside the truck, position it against the front wall and strap it to prevent shifting. Never transport the Tread standing on the running belt surface, as the belt tension system can be damaged.
After moving, reassemble the Peloton in reverse order of disassembly. Place the equipment on a level surface. For the bike, reattach the pedals (left pedal turns counterclockwise to tighten, right pedal turns clockwise). Remount the screen and ensure the connection cable is properly seated before tightening the mounting bolts. For the Tread, unfold the deck and verify the safety lock disengages properly. Reconnect the screen and power cord. Power on the equipment and run a calibration. For the Peloton Bike, go to Settings and follow the calibration procedure, which involves pedaling at specific resistance levels. The bike auto-calibrates during the first few rides, but manual calibration ensures your resistance metrics match your pre-move values. Without calibration, your output numbers may read differently than before, affecting your personal records and class comparisons. For the Tread, the belt may need adjustment if it has shifted during transport. Run the tread at a low speed and observe whether the belt tracks centered or drifts to one side. Belt alignment adjustment screws are accessible from the rear of the machine.
Peloton offers its own moving service in select markets for $175 to $350 depending on the product and distance. This service includes disassembly, transport, and reassembly by trained Peloton technicians. The advantage is that your warranty remains fully intact. If you move the equipment yourself or use third-party movers, be aware that Peloton warranty terms state damage caused by improper moving is not covered. However, normal wear and product defects remain covered regardless of how many times you move the equipment. Third-party fitness equipment movers charge $100 to $250 for a Peloton Bike and $200 to $400 for a Peloton Tread for local moves. These specialists are familiar with the equipment and carry appropriate insurance. Your Peloton subscription is tied to your account, not your location, so it transfers seamlessly. After setup at your new home, log in and verify that your ride history, workout data, and leaderboard position are intact. Wi-Fi setup may need to be reconfigured for your new network. If you experience any issues after the move, Peloton support can often diagnose and resolve problems via the built-in remote diagnostics tool.
Use our free calculator to get a personalized cost estimate for your move.
Try the CalculatorCompare prices from up to 3 local movers. No obligation, no spam.
The Peloton Bike weighs about 135 pounds and can be moved by two people. The Peloton Tread weighs approximately 455 pounds and requires at least 3 people or an appliance dolly. Both have built-in transport wheels for rolling on flat surfaces.
Moving a Peloton does not automatically void the warranty. However, damage caused by improper moving is not covered. Using Peloton official moving service ($175 to $350) or qualified fitness equipment movers helps protect your warranty coverage.
Yes. Run the calibration procedure in Settings after reassembly. Without recalibration, your resistance and output metrics may read differently than before the move, affecting your personal records and class comparisons. The bike also auto-calibrates during the first few rides.
Statistics and cost figures are based on industry averages and publicly available data, provided for informational purposes.
Data last reviewed: March 2026. Learn about our data
